| 1.0 |
Obtain necessary clearances and approvals from Engineers including MEP clearance |
| 2.0 |
Proper Scaffolding should be provided for tall walls. It should be inspected and approved by safety officer |
| 3.0 |
RFIA should be submitted and ensure its approval prior to start paint works |
| 4.0 |
Concrete substrate must be dry, free from any dust, grease and any contaminants. |
| 5.0 |
If molding compound and release agents were to exist, they must be removed from the surface. |
| 6.0 |
Apply first coat using a roller, brush or spray to give a uniform thickness as per to manufacturers recommendation. |
| 7.0 |
Leave to dry for 4 hours prior to any further coats |
| 8.0 |
Apply stucco putty to fill in holes or cracks using putty knife, spatula, and other suitable tools. |
| 9.0 |
Allow drying time to entire area to give a smooth even surface. |
| 10.0 |
Remove all dust prior to application of second coat. |
| 11.0 |
Apply Emulsion application uniformly by airless spray, conventional spray, high quality brush or roller. |
| 12.0 |
Allow drying time of approximately 4-6 hours prior to recoating. |
| 13.0 |
Allow to dry completely |
| 14.0 |
Inspection request to be submitted after completion of works and ensure its approval |
