Category: HVAC Method Statements
-
Pipe Welding Procedure
The purpose of this method statement / pipe welding procedure is to define and outline proposals for carrying out the welding & installation of MS piping System. Method is applicable to all ERW, Black Steel, Schedule 40, Grade ‘B’ and fittings, in accordance with mechanical specifications for pipe sizes 65mm dia. and above. The work…
-
Installation of HVAC VCD Fire Smoke Dampers and Accessories
This Method Statement covers the HVAC dampers and Accessories horizontal and vertical installations. The procedure defines the method used to ensure dampers and accessories installation has been carried out as per standards, contract requirements, and best practices. Method statement gives details of how the ductwork will be carried out and what health and safety issues…
-
FCU Installation Method Statement ( Split Units Ducted & DX Type)
Below document covers FCU installation method statement that covers steps to install FCU units of ducted and DX type air conditioners. By following this HVAC method statement contractor shall ensure that the job execution complies with the project specification and manufacturer requirements and serves the intended function to satisfactory level. Responsibilities for implementation of this…
-
Basement MEP Coordination Shop Drawing Preparation and Checklist
The purpose of preparing the basement MEP coordination drawings is to prevent the clashing of MEP services during the execution of MEP works at a construction project site. Also to prevent the MEP service form coming below the Minimum clearance required for the cars in the driveway and parking as per the requirements of the…
-
HVAC Duct Leakage Testing Procedure
This mechanical HVAC method statement covers the Air Leakage Testing of Metal Ductwork. Procedure defines the method used to ensure that the hvac ductwork has been manufactured and installed with all required seals to suit the specified pressure classifications. The method also gives details of how the work will be carried out and what health…
-
Pump House / Pump Room Piping & Pumps Installation Method Statement
Purpose of this mechanical safework method of statement is to ensure that correct materials are used and agreed procedures are implemented during fabrication, welding, installation and testing of the pump room piping network. This method statement specifies the sequence and methodology for the installation and testing of piping to achieve the best quality of work.…
-
Understanding the Welding Symbols in Engineering Drawings
Welding symbols, like sign posts are informational directors. They are placed on welding drawings by welding engineers and their purpose is to relay information to the welder. In many instances the information relayed is very simple. Welding symbols are used on blueprints and drawings to show where the weld is to be placed and may…
-
Method Statement for External Protective Coating of Steel Pipes and Fitting Joints
This document covers works for the external coating of steel pipes and fitting joints and tests along with a recommendation of generic material types. All the inspection will be performed in accordance with the ITP for field external coating roof steel pipe fittings and joints. Inspections should be performed by QC inspectors who are certified…
-
Close Control Unit CCU Installation Method Statement
Unless otherwise specified, all close control unit installation shall be in accordance to approved shop drawings and contract specifications, drawing plans, schematics, and diagrams indicate general location and arrangement of closed control unit. The Project Manager is the overall responsible person for the process implementation of the ccu installation works. The Construction Manager/Site Mechanical Engineer…