Before starting the Roof Steel Truss Installation necessary Scaffolding or working platform shall be provided with green tag to reach and work at the height safely. Marking of Layout: The base plate level and the center line of the Truss / Column shall be marked based on reference datum and coordinate points given by main contractor… Read More »
The purpose of this method statement is to describe the detailed procedure to be follow for the Commissioning of Elevator (Lift) at the project site. This method statement is prepared also to ensure that concerned persons are familiarized with the sequence of activities, utilization of resources and relevant documents in compliance with HSE and QA/QC… Read More »
Description of the material EpoCrete 100W is a two-component, water dispersible, non-toxic, clear, epoxy coating with excellent resistance to abrasion and moisture. EpoCrete 100W does not contain any volatile organic compounds and is a safer and more environmentally friendly alternative to conventional coatings such as solvent based epoxies, polyesters, and acrylics. EpoCrete 100W is highly abrasion… Read More »
This is best method statement for installation of Exterior Insulation Finishing System also called EIFS. Following materials shall be used for the typical installations. TERRACO STYROFIX: Styrofix is an adhesive for the TERRACO Exterior Insulating Finishing System (EIFS). It is easy to use by just adding /mixing with water, improving on-site quality control. It shows… Read More »
Background Surface Preparation Conmix dressing plaster LC 11 is a pre mixed sand cement mortar for internal and external use. It is recommended as finishing coats/repairing coats on to Portland cement based background, or render surface. LC 11 is ideal material for dubbing out and leveling of backgrounds or as an thin coat plaster. The… Read More »
Below equipment’s & tools shall be arranged before starting the process of roof waterproofing works. Measuring tape Cylinder fed propane torch Heavy duty press rollers Cotton waste Paint roller and paint brush Paint roller and paint brush Heavy duty scissors Thinner or solvent cleaner Broom brush Hand gloves Method Statement for Roof Water Proofing in… Read More »
Required tools & equipment: Following tools or equipment’s shall be arranged: Seam sealer & Edge sealer Cushion back cutter or top cutter Notched trowel 50-75 lb. roller Mini or crab stretcher and power stretcher Knee kicker Straight edges Razor knives Hammer Stay nails, dry line Chalk line and tape measure Procedure for the installation works: Preparation… Read More »
Necessary equipment & tools: Following tools shall be arranged before installation works: Squeegee Roller Brush Level Machine Sanding machine Hammer Drill machine Screw Drivers Method Statement for Wooden Flooring Installation Obtain necessary clearances and approvals from Engineers including MEP clearance. Inspection request should be submitted and ensure its approval prior to start works. Sufficient supply of… Read More »
Following tools shall be arranged before start of the work. Spirit Level Alignment line Drill machine Chalk line Hammer Set of screw drivers Below is Method Statement for Cubicles & Lockers Installations Obtain necessary clearances and approvals from Engineers including MEP clearance. Ensure the area to receive the cubicles will be thoroughly cleaned and it will be… Read More »
Below is the list of tools and other equipment required for ceiling tiles installation. Drill machine Set of screw drivers Level Hammer Shooting Gun machine Jack Saw Method Statement for Aluminium Ceiling Tiles Installation Obtain necessary clearances and approvals from Engineers including MEP clearance. Proper Scaffolding should be provided for blinds installation. It should be… Read More »
