Page 45

Method Statement For Installation of Electrical Water Heaters

1. PURPOSE The purpose of generating this Method Statement is to define the procedure step by step to implement the correct practices for Installation of Electrical Water Heater through the guide line contained herein so as to ensure that the job execution complies with the requirements and serves the intended function to satisfactory level. 2. SCOPE This Method… Read More: Method Statement For Installation of Electrical Water Heaters »

Method Statement For Installation Of Air Handling Units AHU’s

The purpose of below Method Statement is to define step by step procedure for Installation of Air Handling Units AHU’s through the guide line contained herein so as to ensure that the job execution complies with the project requirements and serves the intended function to satisfactory level of the client & end users. Following Tools… Read More: Method Statement For Installation Of Air Handling Units AHU’s »

Method of Statement for Cleaning Flushing and Passivation of Chilled Water System Pipe

Below is detailed mechanical method statement that provides steps for the cleaning, flushing and passivation of chilled water pipe system Objectives of chemical flushing for chilled water system is to remove debris such as slit, sand, scale, iron oxide deposits, weld slug and other contaminants that are present in a new chilled water pipe system,… Read More: Method of Statement for Cleaning Flushing and Passivation of Chilled… »

Method Statement For Installation Of GI Cladding For HVAC Ductwork & Pipework

1. PURPOSE The purpose of generating this Method Statement is to define the procedure step by step to implement the correct practices for GI Cladding of Ductwork & Pipework through the guide line herein so as to ensure that the job execution complies with the requirements and serves the intended function to satisfactory level. 2. SCOPE This Method… Read More: Method Statement For Installation Of GI Cladding For HVAC Ductwork… »

Method Statement For Field Joint Insulation of Pre Insulated Chilled Water Pipe

Below is a detailed Method Statement For Field Joint Insulation of Pre Insulated Chilled Water Pipe. Following tools and equipment shall be arranged before starting the pipe joint insulation process. Rayjoint, S113 sealing strips Propane gas bottle,regulator and gauge,hose and torch Abrasive tape Marker,measurement tape.knife PE Cleaner + Dry cleaning rags Heat shields & Foaming Plugs… Read More: Method Statement For Field Joint Insulation of Pre Insulated Chilled… »