Major hazards while working at height and inside the shafts are falling from height, falling objects and collapse of structure. Below is the precise list of control measures that are applicable for working at height inside shafts and working inside the risers.
Read Full Method Statement
The procedure below covers the Hazard Identification and Risk Assessment that involves on the project sites related with the operation and maintenance of heavy earth moving plant and machineries. Earthmoving usually involves the operation of large, heavy and cumbersome vehicles in an
Read Full Method Statement
This instruction shall ensure dining rooms, food storage areas, kitchens, laundries, general storage areas and accommodation facilities are cleaned and maintained to the required standards. HSE welfare method applies to all dining rooms, food storage areas, kitchens, laundries, general storage areas and
Read Full Method Statement
Table of Content 1. Purpose 2. Scope 3. References 4. Definitions and Abbreviations 5. Responsibilities 6. Procedure 6.1 Risk Assessment 6.2 Medical Screening & Treatment 6.3 Health Surveillance 6.4 Incident Investigation 6.5 Registered Medical Practitioner 6.6 Rehabilitation 6.7 Control Measures 7. Records
Read Full Method Statement
Below article provides instructions and guidance for working safely in the vicinity of overhead services, describing the precautions necessary to mitigate the associated risks. Working close to or passing under overhead power lines without the correct control measures is the cause of
Read Full Method Statement